Brother LX-200 Service Manual page 31

5.Remove the slide plate screw. Remove slide plate 2 from slide plate 1B.
Slide plate screw
Fig. 3.3-16
6.Disconnect lug A on the dial lock arm from the dial switch holder. Pull the dial
lock arm off the shaft.
Lug "A"
Fig. 3.3-17
Slide plate 2
Disassembling the Dial Switch Holder Assy B (3)
D ial lock arm
Disassembling the Dial Switch Holder Assy B (4)
3-11
Slide plate 1B
Dial Switch holder