Adjustments; Adjusting The Right Y-Cutting Position (Border Mode) - Brother LX-200 Service Manual

6.3 Adjustments

6.3.1

Adjusting the Right Y-cutting Position (Border Mode)

Loosen the screw and move slide plate 2 in the direction of the arrow indicated in the
diagram below. This moves the Y-cutter attached to the Y-cutter guide and adjusts the
cutting position for the right edge of the sheet.
In the diagram below, move slide plate 2 in the direction of the arrow to increase the
border of the laminated document.
Margin
Driving roller
Y-cutter guide
Fig. 6.3-1 Adjusting the Right Y-cutting Position
6-17
Slide plate 2
Screw