Paper Eject Roller; Installing The Paper Eject Roller Unit - Brother LX-200 Service Manual

4.9 Paper Eject Roller

4.9.1 Installing the Paper Eject Roller Unit

1. Temporarily remove gear 40-16 and gear 20 when installing the paper eject roller
unit, as these can interfere with the installation.
2. Hold the paper eject roller unit with the end where the gears mount at the left. Insert
the left end into the hole in chassis L, then the right end into the hole in chassis R.
Gear 40-16 hook
Gear 20
Paper eject roller unit
Fig. 4.9-1 Installing the Paper Eject Roller Unit (1)
4-13