Installing The Paper Eject Sub-Roller Unit; Installing The Y-D Shaft - Brother LX-200 Service Manual

4.9.2 Installing the Paper Eject Sub-roller Unit

1. Orient the left paper eject shaft holder L (narrow) and right paper eject shaft holder
R (wide) with the flat face inward and attach them to the paper eject sub-roller unit.
2. Attach the paper eject shaft holders L/R attached to paper eject sub-roller unit to the
paper eject roller shaft in the chassis.

4.9.3 Installing the Y-D Shaft

1. Align the Y-D shaft with the long semicircular end to the right. Align the Y-cutter
cams L/R with each semicircular end of the Y-D shaft and attach them to the shaft.
Y-cutter cam L
Paper eject roller unit
Paper eject sub-roller unit
Paper eject shaft holders L/R
Fig. 4.9-3 Installing the Paper Eject Sub-roller Unit
Y-D shaft
Y-cutter cam R
Fig. 4.9-4 Installing the Y-D Shaft (1)
4-15