Brother LX-200 Service Manual page 76

3. Insert the left and right paper eject roller bearings into the chassis L/R. The paper
eject roller bearings can only be inserted if the lugs on the bearings are aligned with
the grooves in the chassis.
4. Turn the paper eject roller bearing L counterclockwise to the boss hole to insert it in
the chassis left side. Likewise, turn the paper eject roller bearing R clockwise to the
boss hole to insert it in the chassis right side.
5. After inserting the paper eject roller bearing R in the chassis right side, fasten it in
position with the paper eject roller screw.
6. Align the gear 16 hook with the semicircular end of the paper eject roller unit and
push the gear until the hook engages.
7. Replace gear 40-16 hook and gear 20 which were temporarily removed previously.
Gear 16 hook
Paper eject roller bearing
Gear 20
Gear 40-16 hook
Fig. 4.9-2
Paper eject roller unit
Paper eject roller bearing
Installing the Paper Eject Roller Unit (2)
4-14
Paper eject roller screw