Import A Rogue Ap List From A File - NETGEAR WNAP210 User Manual


To enable rogue AP detection:
Select Configuration > Security > Advanced > Rogue AP. The Rogue AP screen
1.
displays:
Click Refresh to discover the APs. See the following section for more information.
2.
Click Move to add APs in the Unknown AP List to the Known AP List.
3.
Click Delete to remove APs from the Known AP List back to the Unknown AP List.
4.
Select the Turn Rogue AP Detection On check box, and click Apply.
5.
If you enable rogue AP detection, the AP continuously scans the wireless network and
collects information about all APs heard on its channel.

Import a Rogue AP List from a File

You can import the Known AP List from a file.

To replace an existing AP list:
Select the Replace radio button to replace the existing list of known APs.
1.
Click Browse, and navigate to the location of the file containing the device list.
2.
Select the file, and click Open.
3.
Click Import to upload the list to the AP.
4.

To merge a file with an existing AP list:
Select the Merge radio button to add the new MAC addresses to the existing list.
1.
Click Browse, and navigate to the location of the file containing the device list.
2.
Select the file, and click Open.
3.
Click Import to upload the list to the AP.
4.
ProSafe Wireless-N Access Point WNAP210
Monitoring
42