Cli Commands; Using Syslog And Activity Log Information - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

802.11g wireless access point

Hide thumbs Also See for WG302 - 802.11g ProSafe Wireless Access Point:

Table of Contents

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual

These settings appear below the connector on the back panel.

3. Press Return, and the screen below should appear.

Figure 3-2.

4. Enter the login name and password (admin and password are the defaults).

After successful login, the <Access Point Name> prompt should appear. In this example, the

prompt is netgear74F35E.

5. Enter help to display the CLI command help.

CLI Commands

The CLI commands are listed in

The Activity Log screen displays the Access Point system activity. It also allows you to enable the

SysLog option if you have a SysLog server on your LAN.

To view the Activity Log and enable a SysLog server:

1. From the main menu of the browser interface, under Information, select Activity Log, The

Activity Log screen will display.

Management

Appendix C, "Command Line

v4.0, April 2006

Reference."

3-3

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the WG302 - 802.11g ProSafe Wireless Access Point and is the answer not in the manual?

Wg302v1 - prosafe 802.11g wireless access point