Using Syslog And Activity Log Information - NETGEAR WAG102 Reference Manual

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
– Manager IP Address: Enter the IP address of the SNMP manager. If this is set to
255.255.255.255,
– IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent
from the wireless access point. The default is 0.0.0.0.

Using Syslog and Activity Log Information

The Information contains the Activity Log link you can use for setting up a syslog server and
viewing activity log information.
1. From the main menu of the browser interface, under the Information heading, click the
Activity Log link to view the list, shown below.
Figure 4-2
The Activity Log Window displays the Access Point system activity.
2. To update the Activity Log display, click Refresh. To save the log contents into a file on your
PC, click Save As and save the file to a disk drive.
4-2
v1.0, September 2005
Management