Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions page 185

Hide thumbs Also See for PARTNER Advanced Communications System Release 1.0:
Table of Contents

Advertisement

To manually ring or voice signal a Hunt Group:
1.
Lift the handset and press
You hear intercom dial tone.
To make a ringing call, dial
2.
The next available extension in the Hunt Group rings. If no one answers
within three rings, the call hunts to the next available extension.
To make a voice-signaled call, press
After the beep, start talking.
Your voice is heard through the speaker of the first available system phone
that is not busy. If no one answers, the call does not keep hunting.
To manually transfer a call to a Hunt Group:
1.
While on a call, press
7 7
2.
Dial
The next available extension in the Hunt Group rings. If no one answers
within three rings, the call hunts to the next available extension. However,
if Transfer Return Rings is programmed for less than four rings, the call
returns to the extension that transferred the call, or to that extension's
transfer return extension.
Standard Phone
To ring or voice signal a Hunt Group:
1.
Lift the handset.
You hear intercom dial tone.
2.
To make a ringing call, dial
The next available extension in the Hunt Group rings. If no one answers
within three rings, the call hunts to the next available extension.
To make a voice-signaled call, press
After the beep, start talking.
Your voice is heard through the speaker of the first available system phone
that is not busy. If no one answers, the call does not keep hunting.
To transfer a call to a Hunt Group:
1.
While on a call, press the switchhook down once rapidly.
You hear intercom dial tone.
7 7
2.
Dial
The next available extension in the Hunt Group rings. If no one answers
within three rings, the call hunts to the next available extension. However,
if Transfer Return Rings is programmed for less than four rings, the call
returns to the extension that transferred the call, or to that extension's
transfer return extension.
5-92
Group Hunting—Ring/Voice Signal (I77G/I*77G)
i
7 7
&
.
and a group number (1–7).
7 7
and a group number (1–7).
.
and a group number (1–7).
* 7 7
and a group number (1–6).
and a group number (1–7).
* 7 7
and a group number (1–6).

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PARTNER Advanced Communications System Release 1.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents