Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions page 46

If a user has a standard phone or a non-display system phone,
Extension Name Display for the extension can be programmed only by
using Centralized Telephone Programming.
To program at the extension, use the following procedure:
1. To start programming, dial
The green lights next to buttons on which lines are assigned for the
extension show the current Line Ringing settings. Remaining buttons can
be programmed with telephone numbers, extension numbers, or system
features.
2. To assign a name to the extension, press left
codes. See Extension Name Display in Chapter 5 for the codes.
3. Program Personal Speed Dial Numbers, Auto Dial numbers, or system
features as described in Chapter 5.
To erase the current programming from a button, press the button, then
!
press
4. To exit programming mode, you can press
off-hook, then place it back in the cradle.
2-26
Programming
f 0 0
.
.
i
, then enter the character
f 0 0
, or lift the handset