Using Telephone Programming; Telephone Models - Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions

Using Telephone Programming

There are two ways to program a telephone: Centralized Telephone
Programming from extension 10 or 11 (see below) and Extension Programming
from a user's own extension (see "Using Extension Programming" later in this
section).

Telephone Models

Figure 2-6 illustrates a PARTNER-18D and Figure 2-7 illustrates a PARTNER-6
phone. As you program buttons, mark their functions on the phone's labeling
sheet (see the examples in Figures 2-6 and 2-7).
NOTE:
A PARTNER-6 phone only has four buttons available for lines. If four lines are
assigned, it has no programmable buttons.
PARTNER-18D Phone
Any unused
line button is
programmable
Figure 2-6. Example of PARTNER-18D Phone
PARTNER-6 Phone
Any unused
line button is
programmable
Figure 2-7. Example of PARTNER-6 Phone
Ext.
Message
Intercom Intercom
Intercom Intercom
Ext. Message
2-23
Programming