Fax Machine Extensions (#601) - Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions

Fax Machine Extensions (#601)

Description
This System Programming procedure identifies extensions to which fax machines
are connected.
Related Features
If you want to monitor fax machine status and make one-touch transfers to
the fax machine, see Auto Dialing to program a Fax Management button
and "Fax Management Feature" in Chapter 4 to use the button.
To prevent other extensions from interrupting a fax call, program the fax
extension for Automatic Extension Privacy (#304).
Considerations
Remove voice messaging system mailboxes from fax machine extensions.
If an automatic fax call comes in on a line covered by the PARTNER MAIL
system, the Automated Attendant Service of that system can be
programmed to automatically transfer the call to a fax extension or to the
extension Hunt Group for the fax machines (if you have multiple fax
machines). See the PARTNER MAIL documentation for instructions.
Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
s
such as
To identify a Fax Machine extension:
f 0 0 s s # 6 0 1
1. Press
or 11.
2. At the Extension: prompt, enter the extension to which the fax machine is
connected. For example, to identify extension 30, press
3. To assign or unassign the extension, press
displays.
4. To program another extension, press
number shows on the display. Repeat Step 3.
5. Select another procedure or exit programming mode.
5-80
Fax Machine Extensions (#601)
e
and on system phones.)
n
at extension 10
3 0
.
D
until the appropriate value
p
or until the extension