System Password (#403) - Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions

System Password (#403)

Description
This feature is available only on PARTNER- and MLS-model phones.
This System Programming procedure defines a four-digit password that users
can enter from PARTNER- and MLS-model phones to override dialing restrictions
(if the extension has access to an outside line).
Related Features
The password overrides all dialing restrictions except Line Access
Restriction (#302).
Once a password is programmed, you must enter it to turn Night Service on
and off. Additionally, if Night Service is on, users in the Night Service
Group must enter the password to make any outgoing calls (except calls to
numbers on the Emergency Phone Number List (#406) and Marked
System Speed Dial Numbers). Dialing restrictions for extensions not in the
Night Service Group remain the same as during normal daytime operation.
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as s
To program a System Password:
1. Press f 0 0 s s # 4 0 3
or 11. A display similar to the following appears:
Set System Password
Data - - - - - - - - - - - -
2. Enter a four-digit password or press
3. Select another procedure or exit programming mode.
Using
1. Before lifting the handset or turning on the speaker at a PARTNER- or
MLS-model phone, press
2. Enter the password.
The System Password does not appear on display phones.
3. Press an outside line button (or press
and lift the handset.
4. Dial the number.
The password is in effect until you hang up the phone.
and e on system phones.)
r
h
.
i 8
at extension 10
to delete the existing password.
and a two-digit line number)
System Password (#403)
5-171