Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions page 175

Valid Entries
1 = Assigned
2 = Not Assigned
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
s
such as
To program an extension for Forced Account Code Entry:
f 0 0 s s # 3 0 7
1. Press
or 11 .
2. At the Extension: prompt, enter the number of the extension to be
programmed. For example, to program extension 15, press
3. To assign or unassign Forced Account Code Entry, press
appropriate value displays.
4. To program another extension, press
number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
5-82
Forced Account Code Entry (#307)
e
and on system phones.)
n
at extension 10
1 5
.
D
until the
p
or until the extension