Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions page 363

SYSTEM RESET – PROGRAMMING SAVED
IMPORTANT:
settings. Use it only if the system fails to function correctly after a power failure or down period.
DIAL #728
Extensions
LINE ASSIGNMENT (p. 5-110)
DIAL #301
DIAL an extension number (10–41)
To remove all existing line
r
assignments, press
before selecting a line.
DIAL a line number (01–15)
DIAL 1=Assigned
2=Not Assigned
3=Select Button then
press a programmable
button (to assign the line
to that button)
If you use option 3 after a
line has been assigned, the
line moves from the old
button to the new button
you select.
n
PRESS to program another
line for this extension.
To program another extension:
N P
PRESS
enter a new extension num-
ber, and repeat above steps
LINE ACCESS RESTRICTION
DIAL #302 (p. 5-108)
DIAL an extension number (10–41)
DIAL a line number (01–15)
DIAL 1 = No Restriction
2 = Outgoing Only
3 = Incoming Only
4 = No Access (line appears
on button, but you can
use line only to pick up a
transferred or held call)
n
PRESS to program another
line
To program another extension:
PRESS N P
enter a new extension num-
ber, and repeat above steps
DISPLAY LANGUAGE (p. 5-66)
DIAL #303
DIAL an extension number (10–41)
DIAL 1 = English
2 = Spanish
3 = French
n
PRESS to program another
extension
= Factory setting
= Button with lights required
Using this procedure disconnects any active calls but retains system
AUTOMATIC EXTENSION PRIVACY
DIAL #304
DIAL an extension number (10-41)
DIAL 1 = Assigned
2 = Not Assigned
PRESS n to program another
extension
ABBREVIATED RINGING (p. 5-5)
DIAL #305
DIAL an extension number (10-41)
DIAL 1 = Active (1 ring)
2 = Not Active (repeated
ringing)
PRESS n to program another
extension
TRANSFER RETURN EXTENSION
DIAL #306
,
DIAL an extension number (10-41)
DIAL number of the extension
(10-41) to which call should
return if not answered
Extension transferring call
n
PRESS to program another
extension
FORCED ACCOUNT CODE ENTRY
DIAL #307
DIAL an extension number (10-41)
DIAL 1 = Assigned
2 = Not Assigned
PRESS n to program another
extension
,
DISTINCTIVE RING
DIAL #308
DIAL an extension number (10-41)
DIAL 1 = Active
2 = Not Active
n
PRESS to program another
extension
– 4 –
(p. 5-173)
INTERCOM DIAL TONE (p. 5-103)
(p. 5-18) DIAL #309
DIAL an extension number (10-41)
DIAL 1 = Regular
2 = Machine
PRESS n to program another
extension
AUTOMATIC VMS COVER
DIAL #310
DIAL an extension number (10-41)
DIAL 1 = Assigned
2 = Not Assigned
PRESS n
extension
EXTERNAL HOTLINE
DIAL #311
(p. 5-181)
DIAL an extension number (10-41)
DIAL 1 = Assigned
2 = Not Assigned
n
PRESS
extension
VOICE INTERRUPT ON BUSY
DIAL #312
DIAL an extension number (10-41)
DIAL 1 = Assigned
2 = Not Assigned
(p. 5-81)
PRESS n
extension
CALL WAITING
DIAL #316
DIAL an extension number (10–41)
(p. 5-67)
DIAL 1 = Assigned
2 = Not Assigned
n
PRESS
extension
COPY SETTINGS
DIAL #399
DIAL a source extension number
DIAL target extension numbers
(p. 5-22)
to program another
(p. 5-78)
to program another
(p. 5-195)
to program another
(p. 5-37)
to program another
(p. 5-55)