Dial-Code Features; Intercom Dial-Code Features - Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions

Dial-Code Features*

F01 Do Not Disturb
F02 Exclusive Hold
F03 Recall
F04 Save Number Redial
F05 Last Number Redial
F06 Conference Drop
F07 Privacy
F08 Touch-Tone Enable
F09 XX
Message Light On
F10 XX Message Light Off
F11, XX , XX Call Forwarding/Call Follow-Me
F12 Account Code Entry
F13 XX Manual Signaling (beep or ring)
F13* XX Manual Signaling (voice signal)

Intercom Dial-Code Features*

I6 XX
Call Pickup
I66 G Group Pickup
I68 LL Direct Line Pickup—Active Line
I70 Loudspeaker Paging
I*70 Simultaneous Paging
I7 G Group Calling—Ring
I*7 G Group Calling—Page
I77 G
Group Hunting—Ring
I*77 G Group Hunting—Voice Signal
I8 LL Direct Line Pickup—Idle Line
*
A 5-Slot carrier can provide a maximum of 32 extensions or a maximum of 15 lines; a 2-Slot carrier can
provide a maximum of 14 extensions or a maximum of 7 lines. References in this guide are to 32 extensions
and to 15 lines, even though no system can be configured with both maximums simultaneously. Your system
does not have to be configured for the maximum of either extensions or lines.
F represents the f button; I represents the
01–41; G represents a single-digit group number; and LL represents a line number from 01–15.
F14
F15
F16
F17
F18
F19
F21
F22
F41
F42
F59
i
button; XX represents an extension number from
Voice Mailbox Transfer
VMS Cover
Caller ID Name Display
Caller ID Inspect
Voice Interrupt On Busy Talk-Back
Background Music
Station Lock
Station Unlock
Contact Closure 1
Contact Closure 2
System Release Status
5-3
Overview