Table of Contents
Advertisement
Installing the Hardware
Overview
This guide explains how to install the PARTNER® II Communications System.
It begins with an example system setup, then shows the components you need
to install the system and gives general guidelines to consider before installation.
Next, it provides step-by-step instructions for connecting and testing the
components for initial installation and upgrades. Finally, it lists important system
specifications. Make sure that your installation meets all electrical and
environmental requirements.
If your company already has modular jacks for all outside lines and extensions,
you may be able to use the existing wiring to install the system hardware and
connect telephones to the system yourself. To have a Lucent Technologies
service technician install and customize your system or change existing wiring,
call 1 800 247-7000 (in the continental U.S.) or call your Lucent Technologies
Representative or local Authorized Dealer.
After installation, refer to the PARTNER II Communications System
Programming and Use guide for programming instructions.
1
Overview
Advertisement
Table of Contents
