Lucent Technologies PARTNER Advanced Communications System Release 1.0 Programming And Use Instructions page 138

Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
s
such as
To change the Caller ID Type setting:
f 0 0 s s # 1 2 2
1. Press
or 11.
The system shows the current setting.
D
2. Press
r
3. Select another procedure or exit programming mode.
e
and on system phones.)
d
or until the appropriate value displays, or press
to return to the default setting.
at extension 10
Caller ID Type (#122)
5-45