Overview - Lucent Technologies PARTNER Advanced Communications System Installation Manual

Installation

Overview

This guide explains how to install the PARTNER
Releases 1.0, 1.1, 2.0 or later. The information applies to all releases unless otherwise
specified.
This guide begins with an example system setup, then shows the components you need to
install the system and gives general guidelines to consider before installation. Next, it
provides step-by-step instructions for connecting and testing the components for initial
installation and upgrades. Finally, it lists important system specifications. Make sure that your
installation meets all electrical and environmental requirements.
If your company already has modular jacks for all outside lines and extensions, you may be
able to use the existing wiring to install the system hardware and connect telephones to the
system yourself. To have a Lucent Technologies service technician install and customize your
system or change existing wiring, call 1 800 247-7000 (in the continental U.S. only) or call
your Lucent Technologies Representative or local Authorized Dealer.
After installation, refer to the PARTNER Advanced Communications System Programming
and Use guide for programming instructions.
®
Advanced Communications System (ACS)
3
Overview