Qos; Access Control Lists; Ip Access Control Lists - D-Link DWS-3160-24TC Reference Manual

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
AP MAC Address
Ad Hoc Clients
This window is used to display the ad hoc clients. An ad hoc client is a wireless client that gains access to the
WLAN through a wireless client that is associated with an access point. The ad hoc client does not communicate
directly with the AP. Ad hoc networks are a particular concern because they consume RF bandwidth and can
present a security risk.
To view this window, click Monitoring > Client > Ad Hoc Clients as shown below:
The fields that can be displayed are described below:
Parameter
MAC Address
AP MAC Address
Location
Radio
Detection Mode
Age
Click the Delete All button to remove all the entries.
Tick the specific check box and click the Allow MAC button to add the MAC address, which default action is allow,
to the Known Clients window and allow the client to access the WLAN.
Tick the specific check box and click the Deny MAC button to add the MAC address, which default action is deny,
to the Known Clients window and block an ad hoc client from WLAN access.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

QoS

Access Control Lists

IP Access Control Lists

This window is used to display the IP access control lists (ACL).
To view this window, click Monitoring > QoS > Access Control Lists > IP Access Control Lists as shown below:
MAC Address of the managed AP to which the client authenticated. This field
can show the MAC address of the last ten APs to which the client has roamed
and authenticated.
Figure 2-54 Ad Hoc Clients window
Description
The Ethernet address of the client. If the Detection Mode is Beacon, the client
is represented as an AP in the RF Scan database and the Neighbor APs list. If
the Detection Mode is Data, the client information is in the Neighbor Clients list.
The base Ethernet MAC Address of the managed AP which detected the client.
The configured descriptive location for the managed AP.
The radio interface and its configured mode that detected the ad hoc device.
The mechanism of detecting this Ad Hoc device. The possible values are
Beacon or Data.
Time since last detection of the ad hoc network.
382

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents