DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Hardware Type
Wired Network
Detection VLAN ID
Click the Apply button to accept the changes made.
After clicking the Radio tab, the following page will appear:
The fields that can be configured or displayed are described below:
Figure 3-3 Basic Setup Profile window
Description
Use the drop-down menu to select the hardware type for the APs that use this
profile.
Enter the VLAN ID that the Switch uses to send tracer packets to detect APs
connected to the wired network. The tracer packets help the switch identify
unauthorized APs that do not belong to the D-Link Unified Access System but are
connected to the wired network.
Figure 3-4 Basic Setup Radio window
392