Software Download - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide

Software Download

This window is used to upgrade software on the APs that the Switch manages. The Cluster Controller can update
code on APs managed by peer wireless switches.
To view this window, click Administration > AP Management > Software Download as shown below:
The fields that can be configured are described below:
Parameter
Server Address
File Path
File Name
Group Size
Image Download Type
Managed AP
Click the Apply button to start the process.
NOTE: This may take about twelve minutes for the upgrade process to complete for an AP. After the
process is complete, the AP will restart automatically and become managed AP again.
After clicking the AP Image Management tab, the following page will appear:
This page is used to a file download process to the wireless switch while the file is a specified AP code image.
Figure 3-15 AP Software Download window
Description
Enter the IP address of the host where the upgrade file is located.
Enter the file path on the TFTP server where the software is located.
NOTE: This field requires to type a forward slash (/) when specifying the file path, for
example "/<filepath>".
Enter the name of the upgrade file.
Enter a number to limit the number of APs to be upgraded at a time.
Use the drop-down menu to select the type of the image to be downloaded.
Display all the managed APs. To upgrade all managed APs, select All from the list.
To upgrade a specific AP, select the AP from the list. To upgrade multiple APs, hold
the CTRL key and select the multiple APs.
407