D-Link DWS-3160-24TC Reference Manual page 425

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Tick the check box of a specific profile and click the Delete button to remove the entry.
Click the Refresh button to update the information.
Click the Profile hyperlink to see more information.
After clicking the Profile hyperlink or the tab with profile name, the following page will appear:
The fields that can be configured are described below:
Parameter
Profile Name
Hardware Type
Disconnected AP Data
Forwarding Mode
Disconnected AP
Management Mode
Wired Network
Detection VLAN ID
Click the Apply button to accept the changes made.
Click the Clear button to discard the changes made and return to the default settings.
Click the Delete button to remove the entry.
After clicking the Radio tab under the Profile Name tab, the following page will appear:
Figure 3-28 AP Profile Configuration – Global window
Description
Enter the Access Point profile name.
Use the drop-down menu to select the hardware type for the APs that use this
profile.
Select to enable or disable disconnected AP data forwarding mode. If the mode is
enabled, the managed AP allows clients that are already associated with to
continue forwarding traffic when the AP loses connection with the Wireless Switch.
Select to enable or disable disconnected AP management mode. If the mode is
enabled, the managed AP enables stand-alone management functionality when it
loses connection with the wireless switch.
Enter the VLAN ID that the Switch uses to send tracer packets to detect APs
connected to the wired network. The tracer packets help the switch identify
unauthorized APs that do not belong to the D-Link Unified Access System but are
connected to the wired network.
420