Authentication Policy Settings; Application Authentication Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide

Authentication Policy Settings

Users can enable an administrator-defined authentication policy for users trying to access the Switch. When
enabled, the device will check the Login Method List and choose a technique for user authentication upon login.
To view this window, click Security > Access Authentication Control > Authentication Policy Settings as
shown below:
The fields that can be configured are described below:
Parameter
Authentication Policy
Response Timeout (0-
255)
User Attempts (1-255)
Click the Apply button to accept the changes made.

Application Authentication Settings

Users can configure Switch configuration applications (Console, Telnet, SSH, HTTP) for login at the user level and
at the administration level (Enable Admin) utilizing a previously configured method list.
To view this window, click Security > Access Authentication Control > Application Authentication Settings as
shown below:
The fields that can be configured or displayed are described below:
Parameter
Application
Figure 11-52 Authentication Policy Settings window
Description
Use the drop-down menu to enable or disable the Authentication Policy on the
Switch.
This field will set the time the Switch will wait for a response of authentication from the
user. The user may set a time between 0 and 255 seconds. The default setting is 30
seconds.
This command will configure the maximum number of times the Switch will accept
authentication attempts. Users failing to be authenticated after the set amount of
attempts will be denied access to the Switch and will be locked out of further
authentication attempts. Command line interface users will have to wait 60 seconds
before another authentication attempt. Telnet and web users will be disconnected
from the Switch. The user may set the number of attempts from 1 to 255. The default
setting is 3.
Figure 11-53 Application Authentication Settings window
Description
Lists the configuration applications on the Switch. The user may configure the Login
Method List and Enable Method List for authentication for users utilizing the Console
232