P User Priority Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
From Port / To Port
Priority
Click the Apply button to accept the changes made.

802.1p User Priority Settings

The Switch allows the assignment of a class of service to each of the 802.1p priorities.
To view the following window, click QoS > 802.1p Settings > 802.1p User Priority Settings, as show below:
Once a priority has been assigned to the port groups on the Switch, then a Class may be assigned to each of the
eight levels of 802.1p priorities using the drop-down menus on this window. User priority mapping is not only for the
default priority configured in the last page, but also for all the incoming tagged packets with 802.1p tag.
Click the Apply button to accept the changes made.
Figure 9-2 Default Priority Settings window
Description
Select the starting and ending ports to use.
Use the drop-down menu to select a value from 0 to 7.
Figure 9-3 802.1p User Priority Settings window
135