D-Link DWS-3160-24TC Reference Manual page 356

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Neighbor Client MAC
RSSI
Channel
Discovery Reason
Age
Click the Neighbor Client MAC hyperlink to see the detail information about Detected Clients.
Click the Delete All Neighbors to remove all the neighbor entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the VAP tab under the Status tab, the following page will appear:
Use the drop down menu to select AP's MAC address and use the radio button to select a radio to view the details
about VAPs on that radio.
After clicking the Distributed Tunneling tab under the Status tab, the following page will appear:
The Ethernet address of client station.
Received Signal Strength Indication, this is an indicator of the signal strength
relative to the neighbor and may give an idea of the neighbor's distance from the
managed AP. The range is from 1 to 100, where 1 is the weakest signal strength.
The managed AP channel the client frame was received on, which may be different
than the operating channel for this radio.
Indicate one or more discovery methods for the neighbor client. One or more of the
following values may be displayed:
•
RF - The client was reported from an RF scan on the radio. Note that client
stations are difficult to detect via RF scan, the other methods are more
common for client neighbor detection.
•
Probe Request - The managed AP received a probe request from the client.
•
Associated to Managed AP - This neighbor client is associated to another
managed AP.
•
Associated to this AP - The client is associated to this managed AP on the
displayed radio.
•
Associated to Peer AP - The client is associated to an AP managed by a peer
switch.
•
Ad Hoc Rogue - The client was detected as part of an Ad Hoc network.
Indicate the time since this client was last reported from an RF scan on the radio.
Figure 2-19 Managed AP Status – VAP window
351