Ap Authentication Failure Status - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Figure 2-26 Managed AP Statistics – Distributed Tunneling window
Use the drop down menu to select AP's MAC address to view information about the number of packets and bytes
transmitted and received by clients that use L2 distributed tunnels on an access point managed by the switch.

AP Authentication Failure Status

This window is used to display the AP that is failed to associate to the Switch.
To view this window, click Monitoring > Access Point > AP Authentication Failure Status as shown below:
Figure 2-27 AP Authentication Failure Status window
Click the Delete All button to remove all entries.
Tick the corresponding check box and click the Manage button to associate the AP with the Switch.
Click the MAC Address hyperlink to see the detail information.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the MAC Address hyperlink, the following page will appear:
Figure 2-28 AP Authentication Failure Status – Detail window
358