Mld Snooping Multicast Vlan Settings - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Multicast Address List
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous window.
Click the Delete button to remove the specific entry.

MLD Snooping Multicast VLAN Settings

Users can add, delete, or configure the MLD snooping multicast VLAN on this page.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > MLD Snooping
Multicast Group VLAN Settings, as show below:
The fields that can be configured are described below:
Parameter
MLD Multicast VLAN
State
MLD Multicast VLAN
Forward Unmatched
VLAN Name
VID (2-4094)
Remap Priority
Replace Priority
Click the Apply button to accept the changes made for each individual section.
Click the Add button to add a new entry based on the information entered.
Figure 7-72 Multicast Group Profile Multicast Address Settings window
Description
Enter the multicast address list.
Figure 7-73 MLD Snooping Multicast VLAN Settings window
Description
Click the radio buttons to enable or disable the MLD multicast VLAN state.
Click the radio buttons to can enable or disable the MLD multicast VLAN Forward
Unmatched state.
Enter the VLAN name used.
Enter the VID value used.
The user can select this option to enable the Remap Priority feature.
Specify the remap priority (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN. If None is specified, the packet's original priority
will be used. The default setting is None.
Tick the check box to specify that the packet's priority will be changed by the switch,
based on the remap priority. This flag will only take effect when the remap priority is
set.
106