D-Link DWS-3160-24TC Reference Manual page 69

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
port of the primary VLAN will behave as the tagged member of the secondary VLAN. A secondary VLAN cannot be
specified with advertisement. Only the primary VLAN can be configured as a layer 3 interface. The private VLAN
member port cannot be configured with the traffic segmentation function.
This window allows the user to configure the private VLAN parameters.
To view the following window, click L2 Features > VLAN > Private VLAN Settings, as show below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID (2-4094)
VLAN List
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Edit button to configure the secondary VLAN.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Edit button to see the following window.
The fields that can be configured are described below:
Parameter
Secondary VLAN Type
Figure 7-14 Private VLAN Settings window
Description
Enter a VLAN name.
Enter a VID value.
Enter a list of VLAN IDs.
Figure 7-15 Private VLAN Settings - Edit window
Description
Use the drop-down menu to select secondary VLAN type between Isolated or
64