D-Link DWS-3160-24TC Reference Manual page 261

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
User Group
Session Timeout
(secs)
Idle Timeout (secs)
Max Up Rate
(bytes/sec)
Max Down Rate
(bytes/sec)
Max Receive (bytes)
Max Transmit (bytes)
Max Total (bytes)
Click the Add button to add a new entry based on the information entered.
After clicking the specific User hyperlink, the following page will appear:
The fields that can be configured are described below:
Parameter
Password
User Group
Session Timeout
(secs)
Idle Timeout (secs)
Max Up Rate
Assign the user to at least one User Group. To assign the user to more than one
group, press the Ctrl key and click each group.
Enter the time in seconds that allows the user to remain connected to the network.
Once the Session Timeout value is reached, the user is logged out automatically.
Enter the time in seconds that allows the user to remain idle before the Switch
automatically logs the user out.
Enter the maximum transmitting speed, in bytes per second, when using the captive
portal.
Enter the maximum receiving speed, in bytes per second, when using the captive
portal.
Enter the maximum number of bytes that the user is allowed to receive when using
the captive portal. After this limit has been reached the user will be disconnected.
Enter the maximum number of bytes that the user is allowed to transmit when using
the captive portal. After this limit has been reached the user will be disconnected.
Enter the maximum number of bytes the user is allowed to transmit and receive. After
this limit has been reached the user will be disconnected.
Figure 11-77 Local User - Configuration window (Edit)
Description
Enter a password for the user.
Assign the user to at least one User Group. To assign the user to more than one
group, press the Ctrl key and click each group.
Enter the time in seconds that allows the user to remain connected to the network.
Once the Session Timeout value is reached, the user is logged out automatically.
Enter the time in seconds that allows the user to remain idle before the Switch
automatically logs the user out.
Enter the maximum transmitting speed, in bytes per second, when using the captive
256