D-Link DWS-3160-24TC Reference Manual page 372

Dws-3160 series web ui reference guide gigabit ethernet unified switch
Hide thumbs Also See for DWS-3160-24TC:
Table of Contents

Advertisement

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Bandwidth Limit Up
Access Control Down
Access Control Up
Diffserv Policy Down
Diffserv Policy Up
After clicking the Neighbors APs tab under the Status tab, the following page will appear:
Click the drop-down menu to select the MAC address of the client with the information to view.
The fields that can be displayed are described below:
Parameter
AP MAC Address
Location
Radio
Discovery Reason
kbps. A value of 0 means no bandwidth limiting is in effect in this direction.
Display the maximum rate at which the client transmits traffic to the AP in bits per
second.
The rate shown in this field is the configured value rounded down to the nearest 64
kbps. A value of 0 means no bandwidth limiting is in effect in this direction.
Display which ACL, if any, is applied to traffic from the AP to the client.
Display which ACL, if any, is applied to traffic from the client to the AP.
Display which DiffServ policy, if any, is applied to traffic from the AP to the client.
Display which DiffServ policy, if any, is applied to traffic from the client to the AP.
Figure 2-37 Associated Clients Status - Neighbor APs window
Description
The base Ethernet address of the Unified Switch managed AP.
The configured descriptive location for the managed AP.
The radio interface and its configured mode that detected this client as a neighbor.
Indicates one or more discovery methods for the neighbor client. One or more of the
following values may be displayed:
RF - The client was reported from an RF scan on the radio. Note that client
stations are difficult to detect via RF scan, the other methods are more common
for client neighbor detection.
Probe Request - The managed AP received a probe request from the client.
Associated to Managed AP - This neighbor client is associated to another
managed AP.
Associated to this AP - The client is associated to this managed AP on the
displayed radio.
Associated to Peer AP - The client is associated to an AP managed by a peer
367

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dws-3160 seriesDws-3160-24pc

Table of Contents