DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
State
VLAN Name
State
Click the Apply button to accept the changes made for each individual section.
SNTP
The Simple Network Time Protocol (SNTP) is a protocol for synchronizing computer clocks through the Internet. It
provides comprehensive mechanisms to access national time and frequency dissemination services, organize the
SNTP subnet of servers and clients, and adjust the system clock in each participant.
SNTP Settings
Users can configure the time settings for the Switch.
To view this window, click Network Application > SNTP > SNTP Settings as shown below:
The fields that can be configured are described below:
Parameter
SNTP State
Current Time
Time Source
SNTP First Server
SNTP Second
Server
SNTP Poll Interval In
Seconds (30-99999)
Click the Apply button to accept the changes made.
Time Zone Settings
Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings as shown below:
This is the VLAN Name that identifies the VLAN the user wishes to apply the DHCP
Local Relay operation.
Enable or disable the configure DHCP Local Relay for VLAN state.
Figure 12-9 SNTP Settings window
Description
Use this radio button to enable or disable SNTP.
Displays the Current Time.
Displays the time source for the system.
The IP address of the primary server from which the SNTP information will be taken.
The IP address of the secondary server from which the SNTP information will be taken.
The interval, in seconds, between requests for updated SNTP information.
272