Interface Association - D-Link DWS-3160-24TC Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
(bytes/sec)
Max Down Rate
(bytes/sec)
Max Receive (bytes)
Max Transmit (bytes)
Max Total (bytes)
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Interface Association

This window is used to associate a configured CP with interfaces. Interfaces could be physical ports or wireless
networks (SSID).
To view this window, click Security > Captive Portal (CP) > Interface Association as shown below:
The fields that can be configured are described below:
Parameter
CP Configuration
Associated Interfaces
Interface List
Click the Delete button to remove the selected interface(s) from the Associated Interfaces box.
Click the Add button to add the selected interface(s) in the Interface List box to the Associated Interfaces box.
CP Status
This window is used to display the CP status.
To view this window, click Security > Captive Portal (CP) > CP Status as shown below:
portal.
Enter the maximum receiving speed, in bytes per second, when using the captive
portal.
Enter the maximum number of bytes that the user is allowed to receive when using
the captive portal. After this limit has been reached the user will be disconnected.
Enter the maximum number of bytes that the user is allowed to transmit when using
the captive portal. After this limit has been reached the user will be disconnected.
Enter the maximum number of bytes the user is allowed to transmit and receive. After
this limit has been reached the user will be disconnected.
Figure 11-78 Interface Association window
Description
Use the drop-down menu to select a CP to configure.
Display all the interfaces associated with the CP. To select more than one interface,
press the Ctrl key and click each interface.
Display all the interfaces that is available to choose. To select more than one
interface, press the Ctrl key and click each interface.
257