DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
NOTE: Traffic Control cannot be implemented on ports that are set for Link Aggregation (Port
Trunking).
NOTE: Ports that are in the Shutdown Forever mode will be seen as Discarding in Spanning Tree
windows and implementations though these ports will still be forwarding BPDUs to the Switch's
CPU.
NOTE: Ports that are in Shutdown Forever mode will be seen as link down in all windows and screens
until the user recovers these ports.
NOTE: The minimum granularity of storm control on a GE port is 1pps.
DSCP
DSCP Trust Settings
This page is to configure the DSCP trust state of ports. When ports are under the DSCP trust mode, the switch will
insert the priority tag to untagged packets by using the DSCP Map settings instead of the default port priority.
To view the following window, click QoS > DSCP > DSCP Trust Settings, as show below:
The fields that can be configured are described below:
Parameter
From Port / To Port
State
Figure 9-7 DSCP Trust Settings window
Description
Use the drop-down menu to select a range of port to configure.
Enable/disable to trust DSCP. By default, DSCP trust is disabled.
140