DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
RADIUS Accounting Settings
This window is used to configure the state of the specified RADIUS accounting service.
To view this window, click Security > RADIUS > RADIUS Accounting Settings as shown below:
The fields that can be configured are described below:
Parameter
Network
Shell
System
Click the Apply button to accept the changes made.
RADIUS Authentication
Users can display information concerning the activity of the RADIUS authentication client on the client side of the
RADIUS authentication protocol.
To view this window, click Security > RADIUS > RADIUS Authentication as shown below:
Figure 11-23 RADIUS Accounting Settings window
Description
When enabled, the Switch will send informational packets to a remote RADIUS server
when 802.1X and WAC port access control events occur on the Switch.
When enabled, the Switch will send informational packets to a remote RADIUS server
when a user either logs in, logs out or times out on the Switch, using the console, Telnet,
or SSH.
When enabled, the Switch will send informational packets to a remote RADIUS server
when system events occur on the Switch, such as a system reset or system boot.
207