D-Link DWS-3160-24TC Reference Manual page 352

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide
Protocol Version
Authenticated Clients
System Up Time
Age
Click the Reboot button to restart the managed AP.
Click the Disassociate Clients to disconnect all the associated clients from the AP.
After clicking the Radio Summary tab under the Status tab, the following page will appear:
The fields that can be displayed are described below:
Parameter
MAC Address
Location
Radio
•
IP Poll Received - The AP was discovered via an IP poll from the Unified
Switch, its IP address is configured in the IP polling list.
•
Peer Redirect - The AP was discovered through a peer switch redirect, the AP
tried to associate with another peer switch and learned the current Unified
Switch IP address from the peer (peer learned Unified Switch IP address in
RADIUS server response when validating the AP).
•
Switch IP Configured - The managed AP is configured with the Unified Switch
IP address.
•
Switch IP DHCP - The managed AP learned the current DWL-8600AP IP
address through DHCP option 43.
•
L2 Poll Received - The AP was discovered through the D-Link Wireless Device
Discovery protocol.
The protocol version supported by the software on the AP, which is learned from
the AP during discovery.
Total number of clients currently associated to the AP that have been
authenticated. This is the sum of all authenticated clients for all the VAPs enabled
on the AP.
Time in seconds since last power-on reset of the managed AP.
Time since last communication between the Unified Switch and the AP.
Figure 2-15 Managed AP Status – Radio Summary window
Description
The Ethernet address of the Unified Switch managed AP. If the MAC address of
the AP is followed by an asterisk (*), it is managed by a peer switch.
A location description for the AP, this is the value configured in the valid AP
database (either locally or on the RADIUS server).
Display the radio interface.
347