You can use the FRZ (Freeze) button to create a still image from a video image, typically
for use as a full-screen logo.
Use the following steps to freeze and un-freeze an input:
Select the desired input and transition it to program with a TAKE.
Press FRZ to immediately freeze the source. The button lights.
To un-freeze the source, press FRZ again. The light turns off.
When a "protected" HDCP source is selected (inputs 7 or 8),
and an HDCP compliant monitor is connected to the output,
you cannot use the FRZ button.
DCS-200 • User's Guide