Download Print this page


The selectable values are:
After you make changes using the Preview Menu, use the Save function to store them in
non-volatile memory. Your configuration parameters will then persist across power cycles.
If you do not choose Save after making changes, you are prompted to do so with a
message like the one shown in the following illustration.
Figure 4-21. Save Preview Configuration Prompt (sample)
If you do not save your changes, your settings will not be restored the next time the system
is powered up or the input is selected.
From the Setup Menu, select Input to display the Input Menu. The Input Menu enables
you to set parameters for the selected input on Program.
DCS-200 • User's Guide
Analog Sync — This field sets the analog output sync polarity.
Values: -H-V, -H+V, +H-V, +H+V
Default: -H-V
DVI Sync — This field sets the DVI output sync polarity.
Values: -H-V, -H+V, +H-V, +H+V
Default: +H+V
S a v e P r e v i e w Co n f i g ?
<SEL> = Yes
<ESC> = No
Press SEL to save your changes.
Press ESC to continue without saving your changes.
The Input Menu does not appear in the menu tree when the
LOGO is on Program.
4. Operation
Using the Setup Menu


   Also See for Barco DCS-200

   Related Manuals for Barco DCS-200

Comments to this Manuals

Symbols: 0
Latest comments: