Table of Contents
Advertisement
6. Upgrading Software
Software Upgrade Overview
pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï
Firmware files for the DCS-200 are loaded into the hardware at power-up. These files are
stored in the unit's onboard flash memory.
The DCS-200's system software can be easily upgraded using the following steps:
•
•
•
•
•
e~êÇï~êÉ=oÉèìáêÉãÉåíë
The following hardware items are required for upgrading DCS-200 software:
•
•
pçÑíï~êÉ=oÉèìáêÉãÉåíë
The following list outlines software requirements for upgrading the DCS-200's software:
•
•
Software files can be downloaded from either the Barco Folsom FTP site or the Barco
website, as described in the following
108
Download the appropriate "upgrade" file from the Barco FTP site or website.
Connect a PC (or laptop) to the DCS-200.
Launch a web browser.
Connect to the DCS-200 using its IP address.
Follow the upgrade instructions in the browser.
IBM compatible computer with an available Ethernet port
Local Ethernet network, including an Ethernet switch
Ensure that your PC (or laptop) uses the Windows
operating systems.
Ensure that your PC (or laptop) has a web browser installed, such as Windows
®
Internet Explorer
or Mozilla Firefox
®
2000 or Windows XP
®
.
"Downloading
Software" section.
DCS-200 • User's Guide
Advertisement
Table of Contents
