Barco DCS-200 User Manual page 49

Hide thumbs Also See for DCS-200:
Table of Contents

Advertisement

póåÅ=pÉíìé
From the Output Menu, select Sync Setup to display the Output Sync Select Menu:
OUTP UT SY NC S ELE CT
> A n a l o g S y n c
Figure 4-14. Output Sync Select Menu (sample)
The Output Sync Select Menu enables you to independently adjust the output sync
polarity of the Analog and DVI outputs. The following functions are available:
d~ãã~
From the Output Menu, select Gamma to specify the output Gamma.
p~îÉ=lìíéìí=`çåÑáÖ
From the Output Menu, select Save Config to save the current output configuration. A
message is briefly shown, after which the system returns to the Output Menu.
Figure 4-15. Saving Output Configuration Message
DCS-200 • User's Guide
Raster Box — This function enables or disables the raster box on the output.
~
When turned ON, the system displays a one-pixel border around the
active output area. Note that the raster box includes gaps that enable
you to precisely align the input video to fill the output raster.
~
When turned OFF, the output is clean, without the border.
DV I S y nc
Analog Sync — This field sets the analog output sync polarity.
~
Values: CSync, -H-V, -H+V, +H-V, +H+V
~
Default: -H-V
DVI Sync — This field sets the DVI output sync polarity.
~
Values: -H-V, -H+V, +H-V, +H+V
~
Default: +H+V
Adjustment
range: 1.0 to 3.0, in steps of 0.1
Default: 1.0
Savin g Output Co nfig
4. Operation
Using the Setup Menu
-H-V
+ H + V
49

Advertisement

Table of Contents
loading

Table of Contents