Download  Print this page


3. Installation
Safety Precautions
For all DCS-200 installation procedures, observe the following important safety and
handling rules to avoid damage to yourself and the equipment:
Inspect the shipping box for damage. If you find any damage, notify the shipping carrier
immediately for all claims adjustments. As you open the box, compare its contents against
the packing slip. If you find any shortages, contact your Barco sales representative.
Once you have removed all the components from their packaging and checked that all the
listed components are present, visually inspect each unit to ensure there was no damage
during shipping. If there is damage, notify the shipping carrier immediately for all claims
The environment in which you install your DCS-200 should be clean, properly lit, free from
static, and have adequate power, ventilation, and space for all components.
The table below provides information regarding supplied cables and adapters:
Table 3-1. DCS-200 Cables and Adapters
Cable / Adapter
AC Power Cord
AC Power Cord
To protect users from electric shock, ensure that the power supplies for each unit
connect to earth via the ground wire provided in the AC power cord.
The AC Socket-outlet should be installed near the equipment and be easily
7 foot, 10A (US Power Cord)
7 foot, 10A (European Power Cord)
DCS-200 • User's Guide


   Also See for Barco DCS-200

   Related Manuals for Barco DCS-200

Comments to this Manuals

Symbols: 0
Latest comments: