Understanding Front-Panel Lockout; Full Lockout Mode; Executive Lockout Mode - Barco DCS-200 User Manual

Hide thumbs Also See for DCS-200:
Table of Contents

Advertisement

råÇÉêëí~åÇáåÖ=cêçåíJm~åÉä=içÅâçìí
The DCS-200 includes two front-panel lockout modes:
cìää=içÅâçìí=jçÇÉ
In the full lockout mode:
Use the following steps to fully lock and unlock the front panel:
1.
Figure 4-77. System Message: Lockout Enabled
2.
bñÉÅìíáîÉ=içÅâçìí=jçÇÉ
From the System Menu, select Executive Mode to initiate a limited front-panel lockout.
Executive mode enables seamless transitions between input sources without the need to
press TAKE. In executive lockout mode:
DCS-200 • User's Guide
Full lockout mode, which locks the front panel from all source selections
Executive mode, which locks all front panel selections except the nine input
buttons (1 through 8 and SDI) and LOGO. In executive mode, the user can
transition from one input source to another without pressing TAKE.
All button pushes and all turns of the rotary knobs will be ignored.
All Ethernet and serial communications commands will function normally.
All button lights will continue to reflect the proper state of the inputs.
Press and hold the SEL and ESC buttons simultaneously for 3 seconds. Once
this button combination has been detected, the following display appears:
Fro nt Panel
L oc k o u t E n a b l e d
To disable the front panel full lockout mode, press and hold the SEL and ESC
buttons simultaneously for 3 seconds. When the button combination is detected,
the system returns to the menu that was displayed before full lockout mode was
enabled.
Button pushes will be ignored for all buttons except the nine input buttons and
LOGO. All turns of the rotary knobs will be ignored.
To take an input source to Program, press the input or LOGO button without
pressing TAKE. The transition is seamless, even if you have Auto Take (in the
User Preference Menu) turned off.
All Ethernet and serial communications commands will function normally.
All button lights will continue to reflect the proper state of the inputs.
4. Operation

Understanding Front-Panel Lockout

101

Advertisement

Table of Contents
loading

Table of Contents