Table of Contents
Advertisement
4. Operation
Control Overview
`çåíêçä=lîÉêîáÉï
There are several ways to control the DCS-200:
•
•
•
mçïÉêJré=fåáíá~äáò~íáçå
After connecting power to the DCS-200, locate the power switch on the back of the chassis,
and turn power ON. While the system is initializing, the following messages are displayed:
Figure 4-1. System Initialization Message 1 (sample)
Figure 4-2. System Initialization Message 2 (sample)
Figure 4-3. System Initialization Message 3 (sample)
34
The front panel is ideal for all basic operations. Available controls include the
Display Section and the buttons in the Inputs Section and the Effects Section.
The built-in web-based GUI is ideal for intuitive point-and-click operations. Refer
to Chapter 5,
"GUI
Operations" on page 103 for additional details.
The DCS-200 can also be controlled remotely via Ethernet or Serial
communications. See Appendix B
details.
D C S - 2 0 0
Ba rco
I n i t i a l i z i n g . . .
P r o g r a m L o a d i n g
ple ase wait...
T r a n s f e r r i n g t o
ma in pro gram .
"Remote
Control" on page 127 for additional
DCS-200 • User's Guide
Advertisement
Table of Contents
