Table of Contents
Advertisement
6. Operations
Working with Layer Functions
tçêâáåÖ=ïáíÜ=i~óÉê=cìåÅíáçåë
The following topics are discussed in this section:
•
•
•
rëáåÖ=cìää=pÅêÉÉå
Use the following steps to take the active PIP or Key to full screen:
1.
FULL
SCREEN
2.
rëáåÖ=cêÉÉòÉ
Use the following steps to freeze a PIP or KEY on Program. This function is useful for
PIPs and Keys that use video and animated graphics.
FREEZE
1.
2.
3.
rëáåÖ=oÉëÉí
The Reset function is context sensitive. It is used to reset the current effect to a nominal
default value.
RESET
Use the following steps to reset a specific PIP or Key modification parameter:
1.
2.
3.
4.
114
Using Full Screen
Using Freeze
Using Reset
In the Layer Functions Section , press PIP or KEY as required. The button
blinks, and the associated source blinks on the Source Selection Bus .
In the Layer Functions Section , press Full Screen . The source's height will be
used as the parameter that define's the full screen size. If borders are ON , they
will be taken into account so that they are visible.
In the Layer Functions Section , press PIP or KEY as required. The button
blinks, and the associated source blinks on the Source Selection Bus .
In the Layer Functions Section , press FREEZE . The button lights solid to
indicate that a "freeze" is associated with the current PIP or Key.
To restore motion to the source, ensure that PIP or KEY is selected (and blinking),
then press FREEZE .
In the Layer Functions Section , press PIP or KEY as required. The button
blinks, and the associated source blinks on the Source Selection Bus .
Ensure that FREEZE is off. Frozen PIPs or Keys cannot be reset.
If required, navigate to the "menu" whose specific function you want to reset (e.g.,
borders, shadows, special effects, size, etc).
In the Layer Functions Section , press RESET to reset the current effect.
PresentationPRO-II • User's Guide
Advertisement
Table of Contents
