Table of Contents
Advertisement
NK==fåíêçÇìÅíáçå
Connectivity Diagram
`çååÉÅíáîáíó=aá~Öê~ã
The figure below illustrates a basic DCS-200 system.
Sample Source Input
Devices
Figure 1-1. Block diagram, DCS-200 system
In the diagram:
•
•
•
In Chapter 2, refer to the
^ééäáÅ~íáçå=nìÉëíáçåë
At Barco, we take pride in offering unique solutions to demanding technical problems. If
you have application questions, require further information or would like to discuss your
application requirements in more detail, please call (866) 469-8036. Our Customer
Support Engineers will be happy to supply you with the support you need. Refer to
Appendix C,
18
Inputs 1 - 6 (Analog)
Inputs 7 - 8 (DVI)
Input 9 (HD/SD SDI)
Up to nine sources can be connected to the DCS-200
~
6 x analog inputs (on HD-15 connectors), for a variety of YUV and
RGBHV sources, including CVBS and Y/C.
~
2 x DVI inputs, for computer sources. These two DVI connectors also
support analog RGB inputs, and these inputs are universal, and accept
all types of sources — just like the six HD-15 connectors. (To connect
analog sources, use a customer-supplied DVI to HD-15 adapter.)
~
1 x SD-SDI or HD-SDI input.
The DCS-200 connects to a Preview monitor via analog or DVI.
The DCS-200 connects to a projector (or other target device) via analog or DVI.
"Inputs
Section" heading on page 22 for details on all inputs.
"Contact
Information" on page 159 for details.
DCS-200
Serial
Ethernet
:
Preview
Program
DCS-200 • User's Guide
Advertisement
Table of Contents
