Messages and Audio Settings
Messages and Audio Settings Page 1
Messages and Audio Settings Page 2
Opening Setup Program
press the external Setup button
menu appears
•
touch «Messages and Audio Settings»
the screen «Messages and Audio Settings Page 1» appears
•
Audio System
with this bar the sound can be activated or deactivated
•
blue background and gray speaker means that the bar is active
•
gray background and red speaker means that the bar is inactive
•
Test Speaker
with this on-screen button the speaker function can be checked
•
touch and release the button
a sound must be heard to indicate Audio System is active
•
Volume
touching «+» or «-» changes the volume
the number in the bar and the blue background of the «+» or
•
«-» reflect the changes
the «Default» on-screen button returns you to the basic settings
•
Selecting Stitch / Selecting Function
the selection of stitches and functions can be indicated
•
acoustically
touch either the bar «Select Function» or the Sound button for
selection of sounds
1-6 sound choices will be activated, both bar and Sound button
•
are blue and the choice of selected sounds is indicated in the
on-screen Sound button by a number (1-6)
touch the Sound button one or more times and the six
possible sounds can be heard (number changes from 1-6)
the sounds can be turned off as follows:
touch the bar «Select Stitch» and/or «Select Function» one or
more times
the bars will be inactive (gray) and the speaker symbols in the
•
on-screen button «Sound» will be red
touch «To Next Page»
the screen «Messages and Audio Settings Page 2» appears
•
following messages can be turned on or off as well as
•
indicated acoustically with the desired choice of sounds (1-6):
Upper Thread Control
•
Lower Thread Control
•
the messages and choice of sounds can be turned on or off
•
independently (i.e. a message can be turned on without any
acoustic sound)
blue background means that the bar or button is activated
•
gray background means that the bar or button is deactivated
•
030794.71.04_0401_a200_EN
Feed Dog Position
•
Presser Foot Position
•
Setup Program
167