Bernina Artista 200 Manual page 156

Programming and Saving Stitches by Number
select Combi Mode
touch «0–9» button
enter number of desired stitch
touch arrow to delete individual numbers
touch field above the numeric pad to delete all numbers
touch «Add» to select further stitches by number
touch «OK» if selection is complete
touch the Multifunction button
touch the function «Save Combination»
select the Drawer where you wish to save the stitch combination
Empty Stitch Altering Area
if the Combi Mode has already been in use and the sewing
•
computer has not been switched off («0») since, the last
programmed or selected stitch combination appears in the Stitch
Altering Area
empty the Stitch Altering Area by deleting combination or open
an empty Drawer to program a new combination
Emptying the Stitch Altering Area in Steps
the stitch above the cursor is deleted
•
touch the Delete function until the Stitch Altering Area is empty
Emptying the Stitch Altering Area in a Single Step
touch the Multifunction button
select «Delete Combination»
touch «Yes» to confirm the message
the Stitch Altering Area is now empty, and a new stitch
•
combination can be programmed
Note:
This procedure does not affect
stitch combinations already saved,
which remain intact.
Saving and Deleting Stitches and Stitch Combinations – Programming and Saving
030794.71.04_0401_a200_EN
155