Bernina Artista 200 Manual page 17

Supplementary Spool Pin (vertical)
A
Note:
By using the Supplementary thread guide
(special accessories), thread winds off the
spool much easier.
16
The Sewing Computer – Operating Instructions
Vertical Spool Pin
the supplementary spool pin (vertical) is stored
•
in the accessory box
insert the pin from right to left in the opening
to remove, pull to the right at the base of the
spool pin
essential sewing aid when using more than one
•
thread, i.e. double needle, etc.
Threading the Double Needle
1. Threading the First Thread
place thread spool on horizontal spool pin
thread by guiding the thread to the front in the
slit and past the tension disc A on the right side
thread sewing computer as usual, but at the
thread guide B guide the thread through on the
right side and thread the right needle
2. Threading the Second Thread
place thread spool on the additional spool pin
thread by guiding the thread to the front in the
slit and past the tension disc A on the left side
guide thread on the left side of the thread guide
B and thread the left needle
threads must not be twisted together
•
Note:
When using the supplementary spool pin
(vertical) always attach the foam pad (pre-
vents the thread from getting caught on
the spool pin)
B
Threading the Triple Needle
two thread spools and one full bobbin are nee-
A •
ded
place one thread spool on horizontal spool pin
place second thread spool and the lower thread
spool, separated by a spool disc, on additional
spool pin (both spools have to turn in the same
direction)
thread as usual by guiding two threads on the
left side of the tension disc A and the thread
guide B and one thread on the right side of disc
030794.71.04_0401_a200_EN