Sewing Settings - Bernina Artista 200 Manual

Sewing Settings

Sewing Settings 1
162
Setup Program
Opening Setup Program
press the external Setup button
menu appears
•
touch «Sewing Settings»
the screen «Sewing Settings 1» appears
•
Sewing Light
when the bar is active (blue) the sewing light will be on
•
continuously when the sewing computer is turned on
when the bar is inactive (x) the sewing light will not come on
•
when the sewing computer is turned on
Motor Speed
touching «+» or «–» changes the maximum speed (4/4).
It increases or reduces the speed by 10 stitches
the number in the bar reflects the stitches per minute
•
any change of the maximum speed affects all 4 speeds
•
(1/4 – 4/4), i.e. slower or faster at all four levels
the «Default» on-screen button returns you to the basic set-
•
tings
Thread Tension Correction
touching «+» or «–» changes the basic setting (0) of the
upper Thread Tension by plus or minus 20%
0 = basic settings (factory settings)
1 = + 10%
2 = + 20%
-1 = - 10%
-2 = - 20%
this correction fine tunes the basic tension setting on your
•
sewing computer, which may be affected by variables such as
thread weight, etc.
the number in the bar and the blue background of the «+»
•
or «–» reflect the changes
the «Default» on-screen button returns you to the basic set-
•
tings
the tension alteration affects all stitches and remains saved
•
when the sewing computer is turned off («0»)
030794.71.04_0401_a200_EN