Screen Display - Bernina Artista 200 Manual

Stitch Selection – Stitches – Functions
Altering the Stitch Width
turn the upper knob
The altered stitch width is shown in
two different ways:
stitch width bar 0-9 (0-5.5) is
•
displayed as yellow area
altered width is visible on stitch
•
width bar (highlighted in blue), in
addition the actual setting is
shown (blue number)
the basic setting is always visible
•
when a change has been made,
e.g. 3.5mm (black bar)
stitch width can be altered from
•
0mm to 9mm when using coded
feet
stitch width can be altered from 0
•
to 5.5mm max. when using
non-coded feet, the stitch width
bar automatically shows 0-5.5mm
Stitch Selection
touch the stitch of your choice
the stitch is highlighted in blue
•
every stitch in the Stitch Altering Area (SAA) is displayed
•
with its number
030794.71.04_0401_a200_EN

Screen Display

Altering the Stitch Length
turn the lower knob
The altered stitch length is shown in
two different ways:
stitch length bar 0-5 is displayed
•
as yellow area
altered length is visible on stitch
•
length bar (highlighted in blue), in
addition the actual setting is
shown (blue number)
the basic setting is always visible
•
when a change has been made,
e.g. 1.5mm (black bar)
stitch length can be altered from
•
0mm to 5mm on most stitches
Display of Selected Stitch
a graphic of the selected stitch is
•
visible in the left portion of the
screen
changes to stitches can be seen on
•
screen
The Sewing Computer – Screen Display
23